User:DrinkyBird/Launcher protocol2

This launcher protocol lets you to talk to servers and get information from them, allowing you to make your own custom programs like browsers, stat tools, and so on.

Protocol information

Version: 0.58 (October 28, 2012), compatible with the developmental version, 1.1.

See "article history" to look up the protocol for prior versions.

The basics

All Zandronum servers use UDP as their network protocol. Additionally, all traffic is compressed using the Huffman algorithm to save bandwidth. Therefore, you'll need a copy of huffman.cpp or huffman.java to encode and decode your traffic appropriately.

There is also an implementation of the Huffman codec written in Python here. Also in Python 3 here.

Definition of data types used in this article:

• Byte: 8 bit integer
• Short: 16 bit integer
• Long: 32 bit integer
• Float: Long representation of a float
• String: null-terminated series of Bytes

Traffic is encoded in little-endian.

Getting the list of servers

This is very easy, accomplished by sending a long and a short to the master server:

Type	Value	Description
Long	5660028	LAUNCHER_MASTER_CHALLENGE
Short	2	MASTER_SERVER_VERSION

If your request is denied, the server will respond with one of the following:

Type	Value	Description
Long	3	Denied; your IP is banned (MSC_IPISBANNED)
Long	4	Denied; your IP has made a request in the past 3 seconds (MSC_REQUESTIGNORED)
Long	5	Denied; you're using an older version of the master protocol (MSC_WRONGVERSION)

If you are accepted, you will receive multiple packets, each starting with:

Type	Value	Description
Long	6	Beginning of list (MSC_BEGINSERVERLISTPART)
Byte	0-255	Packet number (starting with 0)
Byte	8	Beginning of server block (MSC_SERVERBLOCK)

Then you will get this next block, which is repeated for every IP with servers on it.

Type	Value	Description
Byte	0-255	n = Number of servers with this IP address
Byte	0-255	IP address octet
Byte	0-255	IP address octet
Byte	0-255	IP address octet
Byte	0-255	IP address octet
Short	0-65535	IP port (sent 'n' times)

Once the packet is full or all servers are transferred, you will receive 0 as number of servers on the next IP.

Type	Value	Description
Byte	0	There are no ports for the next server, i.e. no more servers in this packet.

Finally, the response should end with either

Type	Value	Description
Byte	2	End of list, you got the full server list now (MSC_ENDSERVERLIST)

or

Type	Value	Description
Byte	7	End of current part of the list, you'll get more packets (MSC_ENDSERVERLISTPART)

Querying individual servers

You need to choose what data you'd like. To do so, bitshift the combination of flags with a boolean OR.

The flags are:

Name	Value	Description
SQF_NAME	0x00000001	The name of the server
SQF_URL	0x00000002	The associated website
SQF_EMAIL	0x00000004	Contact address
SQF_MAPNAME	0x00000008	Current map being played
SQF_MAXCLIENTS	0x00000010	Maximum amount of clients who can connect to the server
SQF_MAXPLAYERS	0x00000020	Maximum amount of players who can join the game (the rest must spectate)
SQF_PWADS	0x00000040	PWADs loaded by the server
SQF_GAMETYPE	0x00000080	Game type code
SQF_GAMENAME	0x00000100	Game mode name
SQF_IWAD	0x00000200	The IWAD used by the server
SQF_FORCEPASSWORD	0x00000400	Whether or not the server enforces a password
SQF_FORCEJOINPASSWORD	0x00000800	Whether or not the server enforces a join password
SQF_GAMESKILL	0x00001000	The skill level on the server
SQF_BOTSKILL	0x00002000	The skill level of any bots on the server
SQF_DMFLAGS	0x00004000	(Deprecated) The values of dmflags, dmflags2 and compatflags. Use SQF_ALL_DMFLAGS instead.
SQF_LIMITS	0x00010000	Timelimit, fraglimit, etc.
SQF_TEAMDAMAGE	0x00020000	Team damage factor.
SQF_TEAMSCORES	0x00040000	(Deprecated) The scores of the red and blue teams. Use SQF_TEAMINFO_* instead.
SQF_NUMPLAYERS	0x00080000	Amount of players currently on the server.
SQF_PLAYERDATA	0x00100000	Information of each player in the server.
SQF_TEAMINFO_NUMBER	0x00200000	Amount of teams available.
SQF_TEAMINFO_NAME	0x00400000	Names of teams.
SQF_TEAMINFO_COLOR	0x00800000	RGB colors of teams.
SQF_TEAMINFO_SCORE	0x01000000	Scores of teams.
SQF_TESTING_SERVER	0x02000000	Whether or not the server is a testing server, also the name of the testing binary.
SQF_DATA_MD5SUM	0x04000000	(Deprecated) Used to retrieve the MD5 checksum of skulltag_data.pk3, now obsolete and returns an empty string instead.
SQF_ALL_DMFLAGS	0x08000000	Values of various dmflags used by the server.
SQF_SECURITY_SETTINGS	0x10000000	Security setting values (for now only whether the server enforces the master banlist)
SQF_OPTIONAL_WADS	0x20000000	Which PWADs are optional
SQF_DEH	0x40000000	List of DEHACKED patches loaded by the server.
SQF_EXTENDED_INFO	0x80000000	Sends extended information. See table below for more details..

Extended flags

Name	Value	Description
SQF2_PWAD_HASHES	0x00000001	The MD5 hashes of the server's loaded PWADs.

For example, to get the server's name and player count, you'd use (SQF_NAME|SQF_NUMPLAYERS). Use these flags appropriately; doing so saves your users' and server hosters' bandwidth.

Now send the server the following packet:

Type	Value	Description
Long	199	Launcher challenge
Long	Flags	Desired information
Long	Time	Current time, this will be sent back to you so you can determine ping.
Long	Extended flags	Optional. Desired extended information - ensure you set SQF_EXTENDED_INFO in normal flags

The server will respond with the following:

Type	Value	Description
Long	Response	5660023: Accepted; server information follows 5660024: Denied; your IP has made a request in the past sv_queryignoretime seconds 5660025: Denied; your IP is banned
Long	Time	The time you sent to the server.

Next, assuming you were accepted, you'll get:

Type	Value	Description
String	Version	Server version string with revision number.
Long	Flags	The info you'll be receiving, possibly corrected (see below).

Followed by:

Type	Flag	Description
String	SQF_NAME	The server's name (sv_hostname)
String	SQF_URL	The server's WAD URL (sv_website)
String	SQF_EMAIL	The server host's e-mail (sv_hostemail)
String	SQF_MAPNAME	The current map's name
Byte	SQF_MAXCLIENTS	The max number of clients (sv_maxclients)
Byte	SQF_MAXPLAYERS	The max number of players (sv_maxplayers)
Byte	SQF_PWADS	The number of PWADs loaded
String	SQF_PWADS	The PWAD's name (Sent for each PWAD)
Byte	SQF_GAMETYPE	The current game mode. See below.
Byte	SQF_GAMETYPE	Instagib - true (1) / false (0)
Byte	SQF_GAMETYPE	Buckshot - true (1) / false (0)
String	SQF_GAMENAME	The base game's name ("DOOM", "DOOM II", "HERETIC", "HEXEN", "ERROR!")
String	SQF_IWAD	The IWAD's name
Byte	SQF_FORCEPASSWORD	Whether a password is required to join the server (sv_forcepassword)
Byte	SQF_FORCEJOINPASSWORD	Whether a password is required to join the game (sv_forcejoinpassword)
Byte	SQF_GAMESKILL	The game's difficulty (skill)
Byte	SQF_BOTSKILL	The bot difficulty (botskill)
Long	SQF_DMFLAGS	[Deprecated] Value of dmflags
Long	SQF_DMFLAGS	[Deprecated] Value of dmflags2
Long	SQF_DMFLAGS	[Deprecated] Value of compatflags
Short	SQF_LIMITS	Value of fraglimit
Short	SQF_LIMITS	Value of timelimit
Short	SQF_LIMITS	time left in minutes (only sent if timelimit > 0)
Short	SQF_LIMITS	duellimit
Short	SQF_LIMITS	pointlimit
Short	SQF_LIMITS	winlimit
Float	SQF_TEAMDAMAGE	The team damage scalar (teamdamage)
Short	SQF_TEAMSCORES	[Deprecated] Blue team's fragcount/wincount/score
Short	SQF_TEAMSCORES	[Deprecated] Red team's fragcount/wincount/score
Byte	SQF_NUMPLAYERS	The number of players in the server
String	SQF_PLAYERDATA	Player's name
Short	SQF_PLAYERDATA	Player's pointcount/fragcount/killcount
Short	SQF_PLAYERDATA	Player's ping
Byte	SQF_PLAYERDATA	Player is spectating - true (1) / false (0)
Byte	SQF_PLAYERDATA	Player is a bot - true (1) / false (0)
Byte	SQF_PLAYERDATA	Player's team (returned on team games, 255 is no team)
Byte	SQF_PLAYERDATA	Player's time on the server, in minutes. Note: SQF_PLAYERDATA information is sent once for each player on the server.
Byte	SQF_TEAMINFO_NUMBER	The number of teams used.
String	SQF_TEAMINFO_NAME	The team's name. (Sent for each team.)
Long	SQF_TEAMINFO_COLOR	The team's color. (Sent for each team.)
Short	SQF_TEAMINFO_SCORE	The team's score. (Sent for each team.)
Byte	SQF_TESTING_SERVER	Whether this server is running a testing binary - true (1) / false (0)
String	SQF_TESTING_SERVER	An empty string in case the server is running a stable binary, otherwise name of the testing binary archive found in http://www.skulltag.com/testing/files/
String	SQF_DATA_MD5SUM	[Deprecated] Returns an empty string.
Byte	SQF_ALL_DMFLAGS	The number of flags that will be sent.
Long	SQF_ALL_DMFLAGS	The value of the flags (Sent for each flag in the order dmflags, dmflags2, zadmflags, compatflags, zacompatflags, compatflags2)
Byte	SQF_SECURITY_SETTINGS	Whether the server is enforcing the master ban list - true (1) / false (0) The other bits of this byte may be used to transfer other security related settings in the future.
Byte	SQF_OPTIONAL_WADS	Amount of optional wad indices that follow
Byte	SQF_OPTIONAL_WADS	Index number int the list sent with SQF_PWADS - this wad is optional (sent for each optional Wad)
Byte	SQF_DEH	Amount of deh patches loaded
String	SQF_DEH	Deh patch name (one string for each deh patch)
Long	SQF_EXTENDED_INFO	The returned extended information.
Byte	SQF2_PWAD_HASHES	The number of PWAD hashes.
String	SQF2_PWAD_HASHES	The hash of the PWAD. The index of the WAD is the same as in SQF_PWADS. Sent for each PWAD.

Note: The server will automatically correct your request if you made a mistake (like request team scores in cooperative games), so always use the flags it sends back to you when reading your data.

And that's it!

Notes

Game modes: Game modes are defined as:

   0   GAMEMODE_COOPERATIVE
   1   GAMEMODE_SURVIVAL
   2   GAMEMODE_INVASION
   3   GAMEMODE_DEATHMATCH
   4   GAMEMODE_TEAMPLAY
   5   GAMEMODE_DUEL
   6   GAMEMODE_TERMINATOR
   7   GAMEMODE_LASTMANSTANDING
   8   GAMEMODE_TEAMLMS
   9   GAMEMODE_POSSESSION
   10  GAMEMODE_TEAMPOSSESSION
   11  GAMEMODE_TEAMGAME
   12  GAMEMODE_CTF
   13  GAMEMODE_ONEFLAGCTF
   14  GAMEMODE_SKULLTAG
   15  GAMEMODE_DOMINATION

To discuss the protocol, use this forum and create a new topic.

Happy coding!