Server variables

Command	Default	Description
[#] sv_adminlistfile	"adminlist.txt"	The admin list contains a list of IPs who are considered to be administrators on the server. Administrators can bypass the sv_maxclients limit and connect to the server even when it's full (up to the maximum of 64). Additionally, these administrators cannot be issued votekicks on.
[#] sv_afk2spec	0	If set, inactive (AFK) players will be forced to spectators after the specified number of minutes.
[#] sv_aircontrol	0.00390625	Defines the control a player has over his direction while in the air. See Air Control for how this is affected by the Compat_Limited_AirMovement flag.
[#] sv_artifactreturntime	30	Determines the amount of time the Terminator sphere or the Hellstone remains dropped before it is moved to a random map spot. Setting this to 0 will cause the artifact never to be returned in this manner.
[#] sv_banexemptionfile	"whitelist.txt"	Defines a whitelist, a list of IPs exempt from bans, this allows server admins to let innocent people caught within range ban enter the server. Additionally, any clients whose IP is on this list can never be votekicked from the server.
[#] sv_banfile	"banlist.txt"	Defines a blacklist, a list of banned IPs unwanted on the server. Anyone, whose IP is on this list, may not connect unless they are also on the whitelist.
[#] sv_banlistreparsetime	0	If set, the banlist, as well as the whitelist and the adminlist, are automatically reparsed from their files into memory every this many seconds. If 0, the files are only reparsed at server startup or manually. Useful for multi-server clusters.
[#] sv_broadcast	true	Whether the server will broadcast to the local area network.
[#] sv_cheats	false	Whether clients can use cheat commands on the server. Use with care! This CVar is not saved to the configuration and will be reset upon restarting the server. In addition, the CVar is 'latched' ,a new game has to be started with the map command to apply the sv_cheats change.
[#] sv_colorstripmethod	0	Whether color codes are stripped in the server console. This does not affect chat messages sent to other clients. Strips the colour codes from messages. Allows colour codes from messages. Leaves the \c<x> format in messages.
[#] sv_coop_damagefactor	1.0	Damage multiplier applied to all damage players recieve from monsters.dealt to players by monsters with this value.
[#] sv_coopspawnvoodoodolls	true	Whether Voodoo dolls are supported online. Note: clients know nothing about the dolls, only the server does. Because of this, the dolls are invisible on the clients.
[#] sv_coopunassignedvoodoodolls	true	When set, all voodoo dolls are spawned when the map is loaded, no matter if the corresponding player is in the server or not. Furthermore, the dolls are not assigned to any player in this mode. Because of this they don't receive any damage and can't pick up any items, but this approach is more resistant to problems caused by ingame joining / leaving.
[#] sv_coopunassignedvoodoodollsfornplayers	Max. players (64)	Controls how many players does the voodoo doll cater for. Unassigned dolls are spawned for players 1 to N, where N is the value of this CVar. Dolls for players with a player number bigger than N are not spawned.
[#] sv_country	"automatic"	(development version 3.1-alpha and above only) Sets the country of the server, which will be presented to server browsers. The value of this variable can be one of: an ISO 3166-1 alpha-3 country code, for example GBR for the United Kingdom, USA for the United States "automatic", to tell the launcher to use IP geolocation (default) or "unknown". Note that not all servers browsers support this feature and will use IP geolocation instead.
[#] sv_defaultdmflags	true	When true, the server will automatically set certain dmflags for certain game modes. For deathmatch and team games (CTF, skulltag, one-flag CTF, etc), these flags are: weapons stay, items respawn, no monsters, no crouching, double ammo. In cooperative, these flags are cleared. For duel, these are exactly the same as the deathmatch ones with the addition of players spawning furthest from other players.
[#] sv_disableautohealth	False	Certain items for Heretic, Hexen and Strife have the ability to auto-trigger when the player's health drops below a certain percentage. Setting this CVAR to true will disable that behavior.
[#] sv_disallowspying	false	When false, this allows clients to spy on other players, even if they would be allowed to do so otherwise. This CVar is a flag on dmflags2.
[#] sv_disallowsuicide	false	Players may not kill themselves with the kill command. This is a flag on dmflags2.
[#] sv_dropstyle	0	Controls how items from monsters are dropped on the floor; whether in Doom or in Strife style. The Strife style generally tosses dropped items farther away. Leave the game's default Standard style Strife style
[#] sv_duelcountdowntime	10	How many seconds the 'warm up' lasts before a duel starts.
[#] sv_enforcebans	true	Whether the banlist is actually enforced or not.
[#] sv_enforcemasterbanlist	true	Whether the server enforces the master server's banlist. Servers may opt out of the master banlist enforcement by setting this to false, though such servers will not be broadcasted on the master.
[#] sv_fastweapons	0	How fast weapons fire. Normal 1 tic per weapon frame 1 tic per frame, frames without codepointers are skipped (that is quite fast)
[#] sv_flagreturntime	15	How long will a flag or skull remain on the ground when dropped before it is automatically returned back to its original position.
[#] sv_forcejoinpassword	false	Whether clients must supply a join password in order to join the game. Clients without the proper join password may still spectate freely. Clients can set join password can be set in multiplayer options.
[#] sv_forcepassword	false	Whether clients must supply the correct password in order to connect to the server. Unline the join password, clients cannot enter the server at all without the correct password, enforcing stricter privacy.
[#] sv_gravity	800	How strong gravity is present in the game world. Higher values creates stronger gravity, lesser values create lighter gravity.
[#] sv_hostemail	"" (empty)	This CVar allows the ability for the clients to send an e-mail to the administrator of the server.
[#] sv_hostname	"Unnamed Zandronum server"	A given name for the server. This is the display name the server has on the master server list.
[#] sv_invasioncountdowntime	10	How many seconds of 'warm-up' time before the invasion game starts and when the next wave begins.
[#] sv_joinpassword	"password"	The join password string the clients must supply in order to join the game. Enforced by sv_forcejoinpassword.
[#] sv_killallmonsters_percentage	100	How much of the monsters have to be killed before the level can be exited. This is a percentage value. sv_killallmonsters has to be set to true for this to be actually enforced.
[#] sv_limitcommands	true	Enables/Disables the client commands flooding protection and prevents clients from Repeatedly using Commands over and over again. Setting this to false will disable all restrictions on commands and new commands may be used right after the previous ones.
[#] sv_limitnumvotes	true	Enables the vote flooding protection and prevents clients from voting the same vote over and over again. Setting this to false will disable all restrictions on voting and new votes may be called right after the previous one.
[#] sv_lmscountdowntime	10	How many seconds of 'warm-up' time before a new LMS match starts.
[#] sv_logfile_append	false	If a logfile with the exact same name is present, the server will merely add into the log file without over writing the previous logfile.
[#] sv_logfilenametimestamp	true	When generating a new log file, the server will append the time and date to the end of the logfile name.
[#] sv_logfiletimestamp	true	The server logfile is written containing time stamps at every new line. This does not affect the server console.
[#] sv_logfiletimestamp_usedate	false	The current date will be prepended to the per-line timestamp of the logfile in the format of "YY:MM:DD".
[#] sv_measureoutboundtraffic	false	Measures how much bandwidth is used for both ACS scripts and actor classes. The console command dumptrafficmeasure prints the results. This is useful mostly for mod developers for identifying and debugging bandwidth hogs. See Measuring outbound traffic for a tutorial.
[#] sv_maprotation	true	The server will use a map rotation list to determine the campaign instead of any other method. The server will advance go to any other map that was not specified in the list.
[#] sv_markchatlines	false	All chat messages within the server console contain a 'CHAT' tag before the typed message from the clients. This can be very useful for reading the logfiles or for making bots that parse chat messages.
[#] sv_maxclients	32	The server only allows this many clients to connect to the server. If the server is full, any new clients will not be able to connect. Note: in older versions, the maximum supported amount of players was 32 and was increased to 64 in the 1.0 release. Since older mods may assume the limit to remain 32, the default remains 32.
[#] sv_maxclientsperip	2	How many players with the same IP can enter the server.
[#] sv_maxlives	0	Amount of lives on the server. This CVar is only meaningful in survival and invasion. In survival, the default value of 0 is intepreted as one life. In invasion, setting this variable above 0 will cause the game to become survival invasion, setting it to 0 results in normal invasion with unlimited lives. A player loses a life when dying in survival, once all lives are lost, the player is considered dead and is forced to spectate for the rest of the match.
[#] sv_maxpacketsize	1024	How much data, in bytes, can be stored in an UDP packet. If packet size is small while network usage is high, this can cause the server to overload during transmissions of the small packets. However, if the packet size is too large, newly connecting clients may not be able to process the packets quickly enough.
[#] sv_maxplayers	32	This many players can join the game, the rest are forced to spectate. Compare sv_maxclients. The same logic for the default also applies.
[#] sv_maxteams	2	Maximum amount of teams allowed. This CVar can be increased to allow 3 or 4 team matches. However, this only works if the map supports as many teams as desired.
[#] sv_minimizetosystray	true	The server console window will be minimized and hidden into the system tray. (Windows only)
[#] sv_minvoters	1	How many players are needed in the server in order to call a vote.
[#] sv_motd	""	Sets a message of the day on the server, a welcome message printed on clients upon connection. Generally used to display rules and/or admin contact information. Clients may call the motd command to redisplay the message if desired.
[#] sv_nocallvote	0	This CVar allows to manage how votes take place. Voting is enabled. No votes can be called whatsoever. Only allow players to vote, spectators have no word.
[#] sv_nochangemapvote	false	Disables all changemap votes. However, map votes may still be called unless sv_nomapvote is set.
[#] sv_nodrop	false	If set, clients may not drop items. Items may never be dropped in duels.
[#] sv_noduellimitvote	false	Disables all votes to change the duel limit.
[#] sv_noflagvote	true	(development version 3.1-alpha and above only) Disables all DMFlag votes.
[#] sv_noforcespecvote	false	Disables all votes to force players to Spec by voting.
[#] sv_nofraglimitvote	false	Disables all votes to change the frag limit.
[#] sv_nokickvote	false	Disables all votes to kick players.
[#] sv_nokill	false	Players may not kill themselves.
[#] sv_nomapvote	false	Disables all map votes. However, changemap votes may still be called unless sv_nochangemapvote is set.
[#] sv_nonextmapvote	false	(development version 3.1-alpha and above only) Disables all nextmap votes. However, nextsecret votes may still be called unless sv_nonextsecretvote is set.
[#] sv_nonextsecretvote	false	(development version 3.1-alpha and above only) Disables all nextsecret votes.
[#] sv_nopointlimitvote	false	Disables all votes to change the point limit.
[#] sv_notimelimitvote	false	Disables all votes to change the time limit.
[#] sv_nowinlimitvote	false	Disables all votes to change the LMS win limit.
[#] sv_password	"password"	The password string clients must give to the server if they desire to connect. This only is meaningful if sv_forcepassword is set.
[#] sv_possessioncountdowntime	10	How many seconds of 'warm-up' time before a new possession match starts.
[#] sv_possessionholdtime	30	How long a player must hold the Hellstone before scoring. The time is measured by seconds.
[#] sv_pure	true	If set, the server uses an authentication mechanism to ensure clients have the correct WADs. Even without this CVar set, the map is always verified. A server host should have no reason to disable this CVar aside of LAN play or testing.
[#] sv_queryignoretime	10	Server browsers query the servers on the master list for information such as ping, players, game settings, WADs used, etc. This CVar defines a flood throttle for this - a launcher client may not query the server again for this many seconds. This can help prevent DDoS attacks.
[#] sv_randomcoopstarts	false	If true, in cooperative game modes players are spawned at random player starts instead of the one designated for them.
[#] sv_randommaprotation	false	If set, the server will randomize the map rotation list instead of advancing through maps in sequence. Only meaningful if sv_maprotation is set too.
[#] sv_rconpassword	""	Defines a password for RCON access on the server. Clients on the game server may use the send_password command to login to RCON and specialized rcon utility programs can also login to the server and control it remotely. If set to an empty string, RCON is disabled and the server can only be controlled from the server console.
[#] sv_showlauncherqueries	false	If set, this CVar will display the IPs of clients quering the server. These clients are not joining the game, this is the server browser quering the servers for information. This CVar can be useful for debugging whether the server is on the master and whether clients can connect to it.
[#] sv_showwarnings	false	If set to true, some certain warning messages are shown. May cause flooding the log for certain mods and should only be used for debugging purposes.
[#] sv_smartaim	0	This value will affect the behaviour of auto-aiming: Autoaim will always target the nearest shootable thing. Tries to avoid shooting at allies and non-monster things. Auto-aim will never aim at friends. Auto-aim will only aim at a hostile monster
[#] sv_suddendeath	true	When the time limit is hit and all teams have the same amount of score, this CVar causes sudden death to commence. The first team to score wins the game no matter what the pointlimit is set to. If unset, the game ends immediately once the timelimit hits and if teams have the same amount of score, the match is declared a draw.
[#] sv_survivalcountdowntime	10	Amount of warm-up in seconds in survival games.
[#] sv_timestamp	false	When true, the server console will contain a timestamp for all messages within the server console.
[#] sv_timestampformat	0	Formatting option for sv_timestamp: HOURS:MINUTES:SECONDS (24 Hour Format) HOURS:MINUTES:SECONDS AM/PM HOURS:MINUTES:SECONDS am/pm HOURS:MINUTES (24 Hour Format) HOURS:MINUTES AM/PM HOURS:MINUTES am/pm
[#] sv_unlimited_pickup	false	When true, this allows players to pickup ammunition past maximum amounts.
[#] sv_updatemaster	true	If set, the server will identify itself to the master server and is broadcasted in the server list. If this variable is false, the server will remain private.
[#] sv_usemapsettingspossessionholdtime	true	If set, the hold time set in a map definition takes precedence over sv_possessionholdtime, if unset, the server CVar has the last word.
[#] sv_usemapsettingswavelimit	true	If set, the wave limit set in a map definition takes precedence over the wavelimit CVar.
[#] sv_useteamstartsindm	false	If set, team starts will be used as possible deatmatch starts in deathmatch gamemodes with teams. (TDM, TLMS)
[#] sv_useticbuffer	true	Instead of processing all commands of a client immediately, they are stored in a "ticbuffer". During each server tic, the server processes up to two sets of commands in this buffer for each client. This limits players to only executing 2 tics worth of shooting and movement commands per each server tic. This limits how jittery laggy players will be. Because each client's own displayed position is predicted, under any reasonable internet conditions the way a client perceives his own movement will be the same whether this variable is on or off. For all stable releases this variable is forced on. For experimental builds it is changeable.
[#] sv_website	""	Sets a website which defines a website for this server. Launchers will use this field as the primary download location for any PWADs they do not have. However, this only works if the website features direct download links for WADs; upload services such as SpeedyShare and FileFront do not and the clients must manually download the required files from them.

Related Pages

• DMFlags
• Console Variables
• Console Commands
• LMSFlags